Buy 2023–2025 Nissan Z 3.0L RWD Automatic Rear Driveshaft OEM
OEM Rear Driveshaft for 2023–2025 Nissan Z
Looking for a replacement 2023–2025 Nissan Z rear driveshaft? This OEM rear driveshaft is listed for the Nissan Z equipped with the 3.0L engine, rear-wheel drive (RWD), and automatic transmission.
The rear driveshaft is an important component of the vehicle’s drivetrain system. It transfers rotational power from the transmission output to the rear differential, helping deliver engine power to the rear wheels. A properly matched driveshaft is essential for maintaining the intended drivetrain connection and vehicle operation.
Whether you are replacing a worn, damaged, or otherwise unsuitable component, selecting the correct OEM-specification part is important for compatibility, installation, and reliable performance.
Product Features and Specifications
- Product: Rear Driveshaft
- Vehicle Make: Nissan
- Vehicle Model: Nissan Z
- Model Years: 2023, 2024, 2025
- Engine: 3.0L
- Drivetrain: Rear-Wheel Drive (RWD)
- Transmission: Automatic (A/T)
- Part Type: OEM replacement component
- Position: Rear driveshaft / propeller shaft application
Please note that the exact OEM part number, component condition, and included hardware should be confirmed with the seller before purchase. Vehicle configuration and production variations can affect fitment.
What Does the Nissan Z Rear Driveshaft Do?
The rear driveshaft is a key part of the Nissan Z drivetrain. Its primary function is to transmit rotational force from the transmission to the rear differential.
As the transmission transfers power, the driveshaft rotates and carries that power toward the rear axle assembly. The differential then distributes torque to the rear wheels.
A correctly matched driveshaft helps maintain the intended connection between drivetrain components. It must have the appropriate length, connection points, balance, and specifications for the vehicle.
Signs Your Rear Driveshaft May Need Replacement
A damaged or worn driveshaft can affect drivetrain operation. Depending on the nature of the problem, possible warning signs may include:
- Vibrations that increase with vehicle speed.
- Unusual clunking noises during acceleration or gear changes.
- Drivetrain noise while driving.
- Noticeable vibration during acceleration.
- Visible damage or wear around driveshaft connections.
These symptoms can also be caused by other drivetrain components, including mounts, joints, bearings, or differential-related problems. A qualified technician should inspect the vehicle before a replacement part is purchased.
Why Choose an OEM Nissan Z Driveshaft?
Choosing an OEM replacement component can help ensure that the replacement is intended for the vehicle’s original drivetrain specifications.
For a performance-oriented vehicle such as the Nissan Z, correct component selection is especially important. An incorrectly matched driveshaft may cause installation difficulties, unwanted vibration, or drivetrain problems.
When comparing replacement parts, consider:
- Correct vehicle model and production year.
- Matching 3.0L engine configuration.
- Rear-wheel-drive application.
- Automatic transmission compatibility.
- OEM part number and manufacturer identification.
- Component condition and included fittings.
Always compare the replacement component with the original part number or confirm compatibility through a reliable vehicle parts catalog.
Nissan Z Drivetrain Compatibility
This rear driveshaft listing is intended for the 2023–2025 Nissan Z 3.0L RWD automatic application. It should not automatically be assumed to fit every Nissan Z configuration or other Nissan models.
The Nissan Z drivetrain includes several interconnected components, such as the transmission, driveshaft, differential, axle assemblies, and related mounting hardware. Each component must be compatible with the vehicle’s specific configuration.
Before ordering, provide your vehicle identification number (VIN) or original OEM part number to confirm the correct application. This is particularly important when comparing parts across different Nissan Z model years or transmission configurations.
Installation and Maintenance Information
Rear driveshaft replacement should be performed by a qualified automotive technician familiar with Nissan drivetrain systems.
Correct installation may involve checking mounting surfaces, connection points, fasteners, alignment, and related drivetrain components. Manufacturer-recommended procedures and torque specifications should always be followed.
After installation, the technician should inspect the drivetrain for unusual noise, vibration, or other signs of incorrect fitment.
Routine drivetrain inspections can also help identify worn connections, damaged components, and other issues before they develop into more serious problems.
Buy a 2023–2025 Nissan Z Rear Driveshaft OEM
If you need a Nissan Z rear driveshaft OEM replacement for your 3.0L RWD automatic vehicle, this listing provides a starting point for identifying the correct drivetrain component.
Before completing your purchase, confirm the model year, engine, transmission, drivetrain configuration, and OEM part number. Buyers should also verify whether the component is new, used, or remanufactured, along with its condition and any included hardware.
Choose the correct rear driveshaft for your Nissan Z and ensure that compatibility is confirmed before installation.23-25 NISSAN Z 3.0L RWD A/T Rear Driveshaft OEM 370006GPOB
Contact us for additional product details, photographs, OEM identification, and fitment confirmation before ordering.
Genuine OEM Fitment: Original Nissan factory rear driveshaft engineered specifically for 2023-2025 Nissan Z 3.OL twin-turbo models with automatic transmission and RWD.
Direct Bolt-On Replacement: Precision-balanced factory component (Part # 370006GPOB) restoring factory driveline alignment, smooth power transfer, and zero-vibration acceleration.
Low-Mileage Quality Assured: Thoroughly inspected, structural integrity tested, and ready for immediate installation to replace damaged, bent, or worn prop shafts.
Genuine OEM 2023–2025 Nissan Z 3.0L RWD Automatic Rear Driveshaft (Part # 370006GPOB)
Upgrade or repair your high-performance sports car with the exact factory engineering it demands. The 2023–2025 Nissan Z 3.0L RWD A/T Rear Driveshaft (OEM Part Number: 370006GPOB) is a original equipment manufacturer propeller shaft designed specifically for the latest generation Nissan Z (RZ34) platform. Whether you are replacing a bent shaft after a rear-end collision, repairing damage from severe launches, or completing an OEM mechanical overhaul, this original driveline assembly ensures smooth torque delivery, precise factory fitment, and reliable structural performance.
Key Features & Technical Specifications
Exact OEM Specification: Part Number 370006GPOB (also referenced as 37000-6GP0B / 37000 6GP0B).
Direct Vehicle Compatibility: Engineered exclusively for the 2023, 2024, and 2025 Nissan Z equipped with the 3.0L VR30DDTT Twin-Turbo V6 engine, Rear-Wheel Drive (RWD), and Automatic Transmission (A/T).
Precision Factory Balance: Dynamic high-RPM balance reduces strain on transmission tail housing bearings and differential pinion seals.
Heavy-Duty Construction: High-strength tubular steel shaft body built to withstand up to 400 horsepower and 350 lb-ft of torque straight from the factory floor.
Complete Assembly: Includes pre-installed heavy-duty universal joints (U-joints), central support bearing mounts, and precise flange yoke connections for direct drop-in installation.
Why Choose an OEM Nissan Z Propeller Shaft Over Aftermarket?
When handling power transfer in a modern twin-turbo sports vehicle like the RZ34 Nissan Z, driveline tolerances are critical. Aftermarket non-OEM driveshafts often introduce unwanted chassis vibrations, premature universal joint wear, or improper rotational mass distribution that can damage the automatic transmission output shaft and rear differential pinion gear.
1. Vibration-Free Driveline Alignment: Original equipment driveshafts undergo computer-guided rotational balancing during manufacturing, eliminating harmful high-speed harmonics and interior cabin hum.
2. Factory U-Joint Geometry: Matches exact factory driveline angles, keeping your rear axle and automatic transmission working in sync without bind or excess noise.
3. Plugs & Bolts Directly In: Zero custom fabrication, trimming, adapter plates, or modification required. Connects directly to the transmission output flange and rear differential companion flange using factory torque specs.










































Reviews
There are no reviews yet.